Skip to content

Free USA Shipping Over $100 | Made In USA

Treehut
Now Reading:
How to Adjust Links From Wooden Bracelet in 6 Steps

How to Adjust Links From Wooden Bracelet in 6 Steps

Got a new bracelet that doesn’t fit? We’ve got you covered — the following step-by-step guide will help you adjust men’s wooden bracelets from Treehut for optimal comfort. You don’t need professional tools either; with a few basic tools and techniques, you can learn how to shorten a bracelet right at home. 


How to Adjust Screw-Pin Bracelets

How to Adjust Links From Wooden Screw-Pin Bracelets


Simply put, screw-in links are attached with tiny screws. In fact, learning
how to shorten a bracelet is pretty easy in this case. Treehut’s Polar, Cascade, and Glacier Collections use these specific pins. 

Tools You Need

  • Two flat-head screwdrivers
  • Tweezers 

Step-By-Step Guide on How to Resize Your Bracelet

  1. Gather Your Tools: Before you begin understanding how to shorten a bracelet, find a clean, well-lit area to work in. Secondly, make sure your screwdriver matches the screw heads on your wooden bracelet. You can also lay out all your materials on a soft surface, like a cloth or mat, to protect your bracelet from getting scratched. 
  2. Insert the Screwdrivers: Gently insert one of the flat-head screwdrivers into the slot of the screw pin that secures the link you wish to remove. This will help hold it in place. Now, insert the second screwdriver into the slot on the opposite side of the screw pin. Turn it counterclockwise to loosen the screw pin. Just be careful not to apply too much force, as this could cause damage. 
  3. Remove the Screw Pin: Once you’re sure the screw pin is loose enough, use the tweezers to grip it and carefully pull it out. You can also use your fingers to remove it if you do not have a pair of tweezers. Place the screw pin somewhere safe to avoid losing it. 
  4. Remove the Link: After pushing out the pin completely, the link should now come apart easily. Remove it and set it aside for future use. If you’re removing multiple links, repeat the process as needed. 
  5. Reattach the Bracelet: To reassemble the bracelet, align the remaining links and insert the pin back into the holes. Use the screwdriver to push the pin into place. Then, tighten it by turning the screwdriver clockwise. Just avoid overdoing it, or you might break it or make it difficult to adjust later. 
  6. Check the Fit: You can now wear the bracelet to see if it fits comfortably. If further adjustments are needed, simply repeat the steps above in the guide on how to shorten a bracelet

Read More: What Is Sustainable Fashion?

How to Adjust Spring-Pin Bracelets

How to Adjust Spring-Pin Wooden Bracelets


Bracelets from our
Climb Collection use a spring-loaded system to secure the links, making it quite simple to customize their fit without needing specialized tools as such. 

Tools You Need

  • Pin tool

A Guide on Bracelet Resizing

  1. Get Your Tools Ready: Before you gain an understanding of how to shorten a bracelet with spring pins, set up in a neat and bright area to avoid losing any parts. 
  2. Insert the Pin Tool: Carefully insert the pin tool into the tiny hole where the pin is located. Make sure the tool fits snugly. 
  3. Push the Pin: Gently push the pin tool upwards to compress the spring mechanism inside the pin. Avoid pushing it too harshly — just enough to release the pin. 
  4. Separate the Link: Once the pin is out, you can remove the link you want to adjust. If you’re removing more than one link, repeat the above process. 
  5. Reassemble the Bracelet: To put your bracelet back together, align the links and insert the pin into its slot. Make sure it’s securely in place. 
  6. Confirm the Fit: Try on your bracelet to check if it’s the right fit. You can go through the whole process in the guide on how to change a bracelet again if needed. 

Read More: The Masculine Charm of Rope Bracelets: A Trend That’s Here to Stay

How to Adjust Straight-Pin Bracelets

how to shorten a straight-pin bracelet


Straight-pin bracelets, like those in our
Classic Collection, use a straightforward system to connect the links — offering a hassle-free way to know how to change a bracelet

Tools You Need

  • Hammer
  • Pin Tool
  • Block (of plastic or wood)

How to Shorten a Bracelet Without Cutting It

  1. Prepare Your Workspace: Place your bracelet on the block. This will provide a flat and stable surface for you to work on. 
  2. Position the Pin Tool: Use the pin tool to press on the smaller end of the pin. 
  3. Tap the Pin Tool: Lightly tap the pin tool with the hammer to drive out the pin. Don’t hit too hard though — only enough to get the pin moving. When it starts to come out, just pull it out completely. 
  4. Take Out the Link: Now, you can take out the link you wish to remove. In case of multiple links, simply repeat these steps for each one.
  5. Put the Bracelet Back Together: Insert the pin back into the link with the pin tool. Make sure the narrow end goes in first. 
  6. Test the Fit: Now it’s time to make sure it fits just right. Slip it onto your wrist, and if it still needs a little tweaking, you can always revisit the guide on how to change a bracelet and adjust accordingly. 

About Treehut

Since a decade ago when we started, our commitment goes beyond crafting exquisite timepieces; it extends to a dedication to sustainability. Join our movement towards a greener future and wear a watch that not only tells time but tells a story of conscious living.

Learn More
Cart Close

Your cart is currently empty.

Start Shopping
Select options Close