Skip to content

40% Off Sitewide Cyber Monday Sale Limited Handmade Stock

Treehut
Previous article
Now Reading:
A Guide to Basic Watch Repairs
Next article

A Guide to Basic Watch Repairs

No matter how much you avoid it, your watch will definitely need some repairs one day. Since watches are delicate and require specialist tools, it is highly recommended to get them fixed by a professional. This is especially important in the case of persistent or complex issues. Certified watchmakers have the skills, equipment, and knowledge to ensure their long-term accuracy and functioning. However, there are still some minor problems that you can address right at home to get your watch ticking again. The following is a guide on common watch repairs, along with a few maintenance tips

Battery Replacement

If your watch has stopped working (and it is a quartz watch), it is most probably because the battery needs to be replaced. Other tell-tale signs include inaccurate time, and a frozen or jumping second hand. This watch repair task is a fairly technical process, as it requires the watch case to be opened. However, with the right tools, it is nothing that you cannot tackle yourself. When selecting a new battery, just be sure to choose the right one for your watch. You can consult your owner’s manual or do some research to confirm what type of battery your watch requires. In addition to a new battery, you will need a small screwdriver and a pair of tweezers. 

  1. Use the screwdriver to remove the back of the watch. Do not misplace the screws. 
  2. Remove the old battery carefully with the tweezers. Note the orientation of the battery inside the watch, as you will need to insert the new one in the same manner.
  3. Insert the new battery in the same orientation as the old one.
  4. You can now replace the back of the watch.

    Watch Band Repair

    how to change watch strap


    Even if the band is not damaged, regular wear and tear as well as fluctuating sizes over the years can lead to
    watch strap replacement or watch link resizing at some point. To replace your current strap, you just need a new band that fits your watch model, and a small screwdriver. 

    1. To remove the band, either carefully push out the spring bar or unscrew the pins holding it in place. 
    2. Screw back the pins to now hold the new band in place. 
    3. Try on the watch to ensure that it fits. 

      On the other hand, for adjusting watch bracelet links, you will need a small screwdriver, and a spring bar tool or pin pusher. 

      1. For bracelets with screws, use the screwdriver to carefully unscrew each link. 
      2. For bracelets with spring bars, however, insert the forked end of the spring bar tool into the small gap between the link and the clasp of the next link. Apply gentle pressure to compress the spring bar and release it from the hole. 
      3. Once the necessary links are removed, reattach the bracelet ends or clasp. 
      4. Check the fit on your wrist. Repeat the process if further adjustment is needed. 
      5. Reattach the bracelet ends or clasp using the screws or spring bars. Make sure they are securely fastened.

        Watch Crown Repair

        This refers to the small knob that is usually located on the side of the watch case. Its primary function is to set the time, but it can also be used for manually winding the mainspring in automatic watches, or adjusting the date in some watches. It can also get stuck due to lack of lubrication or dirt build-up. To fix that, you will need a small brush, soft cloth, lubricant (it should be appropriate for watches), and precision-tip oiler. 

        1. Gently remove any dust or dirt around the crown with the brush. 
        2. Follow the direction given for your lubricant, and apply a small amount to the crown with the precision-tip oiler. 
        3. Distribute the lubricant by turning the crown. 
        4. Wipe away any excess lubricant with the cloth. 
        5. Test the crown to see if it can now move smoothly. 

          Watch Crystal Replacement

          how to replace watch crystal


          This watch repair job is much more complicated, requiring specific tools and some basic skills. You will need a replacement crystal (make sure it’s the correct size and type), case opener or knife, pair of tweezers, microfiber cloth, crystal press, and adhesive. 

          1. If your watch has a screw-down case, use the case opener to unscrew the back. 
          2. Carefully remove the old crystal, without damaging the watch face or movement. 
          3. Gently clean the watch case with the microfiber cloth. 
          4. Install the new crystal. If it is a press-fit crystal, align it with the bezel and press it into place using the crystal press. On the other hand, if your replacement crystal requires adhesive, apply a thin and even layer around the bezel, allowing it to set (according to the manufacturer’s instructions) before placing the crystal. 
          5. Replace the case back, and check to ensure if the crystal is properly fitted. 

            Watch Cleaning

            Regular cleaning helps maintain the watch’s appearance by removing dirt, oils, and grime that can accumulate over time. It also preserves its value, especially in the case of high-end timepieces. Moreover, it prevents potential damage caused by dirt build-up, which can affect the watch’s functionality, like hindering the movement or causing premature wear. To effectively clean the watch, you just need a brush (a clean toothbrush would suffice), antibacterial wipe, and microfiber cloth (or any soft cloth). 

            1. Gently remove any dirt or debris by wiping the watch with the antibacterial wipe. 
            2. Clean small crevices, like around the crown or in the grooves of an engraved watch, with a soft bristled brush. 
            3. Polish the watch with the soft, lint-free cloth to remove any smudges or fingerprints. 

              In the case of a leather watch, you can use a leather cleaner and conditioner to maintain its suppleness. Just be sure to avoid water when cleaning your watch as it can increase the risk of irreparable damage. 

              Tips on Watch Care

              watch care


              To avoid frequent watch repairs, the following are some tips on how to take care of your timepiece and minimize damage.

              • When not in use, store the watch properly in its box, a pouch, or a lined box. This helps protect it from accidental damage and external elements. 
              • Do not place your timepiece on its face or side, as this can lead to scratches. 
              • Avoid submerging non-waterproof watches in water.
              • Regularly clean your watch with a soft cloth. 
              • If you have a quartz watch, replace the battery as needed to avoid leakage and potential damage. If your watch is manual or automatic, make sure to wind it regularly.

              About Treehut

              Since a decade ago when we started, our commitment goes beyond crafting exquisite timepieces; it extends to a dedication to sustainability. Join our movement towards a greener future and wear a watch that not only tells time but tells a story of conscious living.

              Learn More
              Cart Close

              Your cart is currently empty.

              Start Shopping
              Select options Close